How to Setup

How to Setup Your COMFAST WiFi Extender




Setting up Comfast Wireless Network Repeater using Simple Method

Comfast wireless network repeater Video

  • Step 1 – Connect to WiFi Signal COMFAST – XXXXXX
  • Step 2 – Open the browser and type the IP address 192.18.10.1

  • Step 3 – Enter the default username and password – both are admin

  • Step 4 – From a PC Select Repeater , smart phones won’t show this option

  • Step 5 – Repeater will scan for available signals

  • Step 6 – Select the signal you want to repeat
  • Step 7 – Enter the WiFi password of your wireless router

  • Step 8 – Wait 30 seconds while the repeater resets

  • Step 9 – Reconnect to the new wireless network and enter the password


  • Step 10 – You are all done – wireless signal should now be available after connecting. If not, hold down reset button for 30 seconds and start again.

Setting Up Comfast Wireless Network Repeater Using WPS

  • Step 1 – Position the Comfast Repeater beside the Network Signal Access Point ( you can re position once synced)
  • Step 2 – Press and hold the WPS button on your home network (5 – 10 Seconds)
  • Step 3 – (Within 2 minutes) Press and hold the WPS button on the Comfast Repeater for 10 Seconds
  • Step 4 – Flashing blue lights on the WiFi signal will indicate the connection is being set up
  • Step 5 – Connect to the Comfast Network Repeater which will be named “Home Network”- PLUS
  • Step 6 – You will be required to create or enter the password for security purposes, only once.
  • Step 7 – Your WiFi Network Extender is set up, reposition as required.

Comfast wifi Setting Up Access Point Instructions

  • Step 1 – Connect to Wireless Network COMFAST
  • Step 2 – Open your web browser and type in http://192.168.10.1
  • Step 3 – Enter username admin and password admin
  • Step 4 – Select “AP”
  • Step 5 – Set your New Network Name, Encryption Type and a new password in the Key field as below, then select “Apply”
  • or if you have a 2G and 5G Access Point
  • Step 6 – Wait for device to reboot.
  • Step 7 – Connect to the new wireless network you’ve named with the password you’ve set.
  • Step 8. You should be online, enjoy.
comfast wifi © 2019